Waterproofing of construction joints at wall/floor junctions

For retroactive waterproofing of the wall-floor junction, the boreholes must be drilled transecting the construction joint. The borehole should be drilled approximately into the middle of the construction joint.

For this application, KOSTER Superpackers or KOSTER One Day Site Packers are used. The injection is done with the KOSTER 1C Injection Pump.

KOSTER KB-Pur IN 5 can be used, which is a very low viscosity polyurethane injection resin with a very long pot life. It will pass into the small and finest cracks along the construction joint.

In case of flowing water, or when it is not certain if the crack is dry or wet, inject KOSTER KB-Pur 2 IN 1. It is injected twice, 10 – 20 minutes apart to ensure that the joint is permanently and elastically sealed.

Always adhere to the specifications in the respective Technical Guidelines.

 

Back

Top
Austria Brasil Bulgaria China Croatia Denmark Finland France Germany Ghana Greece Hungary Italy Japan Kazakhstan Korea Latvia Lebanon Mexico Netherlands Norway Panama Philippines Poland Portugal Romania Russia Senegal Serbia Slovakia Slovenia Thailand Turkey Ukraine United Kingdom United States of America